how to write analysis and findings in dissertation

• How it works

How to Write the Dissertation Findings or Results – Tips

Published by Grace Graffin at August 11th, 2021 , Revised On August 13, 2024

Each  part of the dissertation is unique, and some general and specific rules must be followed. The dissertation’s findings section presents the key results of your research without interpreting their meaning .

Theoretically, this is an exciting section of a dissertation because it involves writing what you have observed and found. However, it can be a little tricky if there is too much information to confuse the readers.

The goal is to include only the essential and relevant findings in this section. The results must be presented in an orderly sequence to provide clarity to the readers.

This section of the dissertation should be easy for the readers to follow, so you should avoid going into a lengthy debate over the interpretation of the results.

It is vitally important to focus only on clear and precise observations. The findings chapter of the  dissertation  is theoretically the easiest to write.

It includes  statistical analysis and a brief write-up about whether or not the results emerging from the analysis are significant. This segment should be written in the past sentence as you describe what you have done in the past.

This article will provide detailed information about  how to   write the findings of a dissertation .

When to Write Dissertation Findings Chapter

As soon as you have gathered and analysed your data, you can start to write up the findings chapter of your dissertation paper. Remember that it is your chance to report the most notable findings of your research work and relate them to the research hypothesis  or  research questions set out in  the introduction chapter of the dissertation .

You will be required to separately report your study’s findings before moving on to the discussion chapter  if your dissertation is based on the  collection of primary data  or experimental work.

However, you may not be required to have an independent findings chapter if your dissertation is purely descriptive and focuses on the analysis of case studies or interpretation of texts.

• Always report the findings of your research in the past tense.
• The dissertation findings chapter varies from one project to another, depending on the data collected and analyzed.
• Avoid reporting results that are not relevant to your research questions or research hypothesis.

Does your Dissertation Have the Following?

• Great Research/Sources
• Perfect Language
• Accurate Sources

If not, we can help. Our panel of experts makes sure to keep the 3 pillars of the Dissertation strong.

1. Reporting Quantitative Findings

The best way to present your quantitative findings is to structure them around the research  hypothesis or  questions you intend to address as part of your dissertation project.

Report the relevant findings for each research question or hypothesis, focusing on how you analyzed them.

Analysis of your findings will help you determine how they relate to the different research questions and whether they support the hypothesis you formulated.

While you must highlight meaningful relationships, variances, and tendencies, it is important not to guess their interpretations and implications because this is something to save for the discussion  and  conclusion  chapters.

Any findings not directly relevant to your research questions or explanations concerning the data collection process  should be added to the dissertation paper’s appendix section.

Use of Figures and Tables in Dissertation Findings

Suppose your dissertation is based on quantitative research. In that case, it is important to include charts, graphs, tables, and other visual elements to help your readers understand the emerging trends and relationships in your findings.

Repeating information will give the impression that you are short on ideas. Refer to all charts, illustrations, and tables in your writing but avoid recurrence.

The text should be used only to elaborate and summarize certain parts of your results. On the other hand, illustrations and tables are used to present multifaceted data.

It is recommended to give descriptive labels and captions to all illustrations used so the readers can figure out what each refers to.

How to Report Quantitative Findings

Here is an example of how to report quantitative results in your dissertation findings chapter;

Two hundred seventeen participants completed both the pretest and post-test and a Pairwise T-test was used for the analysis. The quantitative data analysis reveals a statistically significant difference between the mean scores of the pretest and posttest scales from the Teachers Discovering Computers course. The pretest mean was 29.00 with a standard deviation of 7.65, while the posttest mean was 26.50 with a standard deviation of 9.74 (Table 1). These results yield a significance level of .000, indicating a strong treatment effect (see Table 3). With the correlation between the scores being .448, the little relationship is seen between the pretest and posttest scores (Table 2). This leads the researcher to conclude that the impact of the course on the educators’ perception and integration of technology into the curriculum is dramatic.

Paired Samples

Paired Samples Correlation

Paired Samples Test

Also Read: How to Write the Abstract for the Dissertation.

2. Reporting Qualitative Findings

A notable issue with reporting qualitative findings is that not all results directly relate to your research questions or hypothesis.

The best way to present the results of qualitative research is to frame your findings around the most critical areas or themes you obtained after you examined the data.

In-depth data analysis will help you observe what the data shows for each theme. Any developments, relationships, patterns, and independent responses directly relevant to your research question or hypothesis should be mentioned to the readers.

Additional information not directly relevant to your research can be included in the appendix .

How to Report Qualitative Findings

Here is an example of how to report qualitative results in your dissertation findings chapter;

The last question of the interview focused on the need for improvement in Thai ready-to-eat products and the industry at large, emphasizing the need for enhancement in the current products being offered in the market. When asked if there was any particular need for Thai ready-to-eat meals to be improved and how to improve them in case of ‘yes,’ the males replied mainly by saying that the current products need improvement in terms of the use of healthier raw materials and preservatives or additives. There was an agreement amongst all males concerning the need to improve the industry for ready-to-eat meals and the use of more healthy items to prepare such meals. The females were also of the opinion that the fast-food items needed to be improved in the sense that more healthy raw materials such as vegetable oil and unsaturated fats, including whole-wheat products, to overcome risks associated with trans fat leading to obesity and hypertension should be used for the production of RTE products. The frozen RTE meals and packaged snacks included many preservatives and chemical-based flavouring enhancers that harmed human health and needed to be reduced. The industry is said to be aware of this fact and should try to produce RTE products that benefit the community in terms of healthy consumption.

Looking for dissertation help?

Research prospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

What to Avoid in Dissertation Findings Chapter

• Avoid using interpretive and subjective phrases and terms such as “confirms,” “reveals,” “suggests,” or “validates.” These terms are more suitable for the discussion chapter , where you will be expected to interpret the results in detail.
• Only briefly explain findings in relation to the key themes, hypothesis, and research questions. You don’t want to write a detailed subjective explanation for any research questions at this stage.

The Do’s of Writing the Findings or Results Section

• Ensure you are not presenting results from other research studies in your findings.
• Observe whether or not your hypothesis is tested or research questions answered.
• Illustrations and tables present data and are labelled to help your readers understand what they relate to.
• Use software such as Excel, STATA, and SPSS to analyse results and important trends.

Essential Guidelines on How to Write Dissertation Findings

The dissertation findings chapter should provide the context for understanding the results. The research problem should be repeated, and the research goals should be stated briefly.

This approach helps to gain the reader’s attention toward the research problem. The first step towards writing the findings is identifying which results will be presented in this section.

The results relevant to the questions must be presented, considering whether the results support the hypothesis. You do not need to include every result in the findings section. The next step is ensuring the data can be appropriately organized and accurate.

You will need to have a basic idea about writing the findings of a dissertation because this will provide you with the knowledge to arrange the data chronologically.

Start each paragraph by writing about the most important results and concluding the section with the most negligible actual results.

A short paragraph can conclude the findings section, summarising the findings so readers will remember as they transition to the next chapter. This is essential if findings are unexpected or unfamiliar or impact the study.

Our writers can help you with all parts of your dissertation, including statistical analysis of your results . To obtain free non-binding quotes, please complete our online quote form here .

Be Impartial in your Writing

When crafting your findings, knowing how you will organize the work is important. The findings are the story that needs to be told in response to the research questions that have been answered.

Therefore, the story needs to be organized to make sense to you and the reader. The findings must be compelling and responsive to be linked to the research questions being answered.

Always ensure that the size and direction of any changes, including percentage change, can be mentioned in the section. The details of p values or confidence intervals and limits should be included.

The findings sections only have the relevant parts of the primary evidence mentioned. Still, it is a good practice to include all the primary evidence in an appendix that can be referred to later.

The results should always be written neutrally without speculation or implication. The statement of the results mustn’t have any form of evaluation or interpretation.

Negative results should be added in the findings section because they validate the results and provide high neutrality levels.

The length of the dissertation findings chapter is an important question that must be addressed. It should be noted that the length of the section is directly related to the total word count of your dissertation paper.

The writer should use their discretion in deciding the length of the findings section or refer to the dissertation handbook or structure guidelines.

It should neither belong nor be short nor concise and comprehensive to highlight the reader’s main findings.

Ethically, you should be confident in the findings and provide counter-evidence. Anything that does not have sufficient evidence should be discarded. The findings should respond to the problem presented and provide a solution to those questions.

Structure of the Findings Chapter

The chapter should use appropriate words and phrases to present the results to the readers. Logical sentences should be used, while paragraphs should be linked to produce cohesive work.

You must ensure all the significant results have been added in the section. Recheck after completing the section to ensure no mistakes have been made.

The structure of the findings section is something you may have to be sure of primarily because it will provide the basis for your research work and ensure that the discussions section can be written clearly and proficiently.

One way to arrange the results is to provide a brief synopsis and then explain the essential findings. However, there should be no speculation or explanation of the results, as this will be done in the discussion section.

Another way to arrange the section is to present and explain a result. This can be done for all the results while the section is concluded with an overall synopsis.

This is the preferred method when you are writing more extended dissertations. It can be helpful when multiple results are equally significant. A brief conclusion should be written to link all the results and transition to the discussion section.

Numerous data analysis dissertation examples are available on the Internet, which will help you improve your understanding of writing the dissertation’s findings.

Problems to Avoid When Writing Dissertation Findings

One of the problems to avoid while writing the dissertation findings is reporting background information or explaining the findings. This should be done in the introduction section .

You can always revise the introduction chapter based on the data you have collected if that seems an appropriate thing to do.

Raw data or intermediate calculations should not be added in the findings section. Always ask your professor if raw data needs to be included.

If the data is to be included, then use an appendix or a set of appendices referred to in the text of the findings chapter.

Do not use vague or non-specific phrases in the findings section. It is important to be factual and concise for the reader’s benefit.

The findings section presents the crucial data collected during the research process. It should be presented concisely and clearly to the reader. There should be no interpretation, speculation, or analysis of the data.

The significant results should be categorized systematically with the text used with charts, figures, and tables. Furthermore, avoiding using vague and non-specific words in this section is essential.

It is essential to label the tables and visual material properly. You should also check and proofread the section to avoid mistakes.

The dissertation findings chapter is a critical part of your overall dissertation paper. If you struggle with presenting your results and statistical analysis, our expert dissertation writers can help you get things right. Whether you need help with the entire dissertation paper or individual chapters, our dissertation experts can provide customized dissertation support .

FAQs About Findings of a Dissertation

How do i report quantitative findings.

The best way to present your quantitative findings is to structure them around the research hypothesis or research questions you intended to address as part of your dissertation project. Report the relevant findings for each of the research questions or hypotheses, focusing on how you analyzed them.

How do I report qualitative findings?

The best way to present the qualitative research results is to frame your findings around the most important areas or themes that you obtained after examining the data.

An in-depth analysis of the data will help you observe what the data is showing for each theme. Any developments, relationships, patterns, and independent responses that are directly relevant to your research question or hypothesis should be clearly mentioned for the readers.

Can I use interpretive phrases like ‘it confirms’ in the finding chapter?

No, It is highly advisable to avoid using interpretive and subjective phrases in the finding chapter. These terms are more suitable for the discussion chapter , where you will be expected to provide your interpretation of the results in detail.

Can I report the results from other research papers in my findings chapter?

NO, you must not be presenting results from other research studies in your findings.

You May Also Like

Finding it difficult to maintain a good relationship with your supervisor? Here are some tips on ‘How to Deal with an Unhelpful Dissertation Supervisor’.

Have you failed dissertation, assignment, exam or coursework? Don’t panic because you are not alone. Get help from our professional UK qualified writers!

Here are the steps to make a theoretical framework for dissertation. You can define, discuss and evaluate theories relevant to the research problem.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write a Results Section | Tips & Examples

How to Write a Results Section | Tips & Examples

Published on August 30, 2022 by Tegan George . Revised on July 18, 2023.

A results section is where you report the main findings of the data collection and analysis you conducted for your thesis or dissertation . You should report all relevant results concisely and objectively, in a logical order. Don’t include subjective interpretations of why you found these results or what they mean—any evaluation should be saved for the discussion section .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to write a results section, reporting quantitative research results, reporting qualitative research results, results vs. discussion vs. conclusion, checklist: research results, other interesting articles, frequently asked questions about results sections.

When conducting research, it’s important to report the results of your study prior to discussing your interpretations of it. This gives your reader a clear idea of exactly what you found and keeps the data itself separate from your subjective analysis.

Here are a few best practices:

• Your results should always be written in the past tense.
• While the length of this section depends on how much data you collected and analyzed, it should be written as concisely as possible.
• Only include results that are directly relevant to answering your research questions . Avoid speculative or interpretative words like “appears” or “implies.”
• If you have other results you’d like to include, consider adding them to an appendix or footnotes.
• Always start out with your broadest results first, and then flow into your more granular (but still relevant) ones. Think of it like a shoe store: first discuss the shoes as a whole, then the sneakers, boots, sandals, etc.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

If you conducted quantitative research , you’ll likely be working with the results of some sort of statistical analysis .

Your results section should report the results of any statistical tests you used to compare groups or assess relationships between variables . It should also state whether or not each hypothesis was supported.

The most logical way to structure quantitative results is to frame them around your research questions or hypotheses. For each question or hypothesis, share:

• A reminder of the type of analysis you used (e.g., a two-sample t test or simple linear regression ). A more detailed description of your analysis should go in your methodology section.
• A concise summary of each relevant result, both positive and negative. This can include any relevant descriptive statistics (e.g., means and standard deviations ) as well as inferential statistics (e.g., t scores, degrees of freedom , and p values ). Remember, these numbers are often placed in parentheses.
• A brief statement of how each result relates to the question, or whether the hypothesis was supported. You can briefly mention any results that didn’t fit with your expectations and assumptions, but save any speculation on their meaning or consequences for your discussion  and conclusion.

A note on tables and figures

In quantitative research, it’s often helpful to include visual elements such as graphs, charts, and tables , but only if they are directly relevant to your results. Give these elements clear, descriptive titles and labels so that your reader can easily understand what is being shown. If you want to include any other visual elements that are more tangential in nature, consider adding a figure and table list .

As a rule of thumb:

• Tables are used to communicate exact values, giving a concise overview of various results
• Graphs and charts are used to visualize trends and relationships, giving an at-a-glance illustration of key findings

Don’t forget to also mention any tables and figures you used within the text of your results section. Summarize or elaborate on specific aspects you think your reader should know about rather than merely restating the same numbers already shown.

A two-sample t test was used to test the hypothesis that higher social distance from environmental problems would reduce the intent to donate to environmental organizations, with donation intention (recorded as a score from 1 to 10) as the outcome variable and social distance (categorized as either a low or high level of social distance) as the predictor variable.Social distance was found to be positively correlated with donation intention, t (98) = 12.19, p < .001, with the donation intention of the high social distance group 0.28 points higher, on average, than the low social distance group (see figure 1). This contradicts the initial hypothesis that social distance would decrease donation intention, and in fact suggests a small effect in the opposite direction.

Figure 1: Intention to donate to environmental organizations based on social distance from impact of environmental damage.

In qualitative research , your results might not all be directly related to specific hypotheses. In this case, you can structure your results section around key themes or topics that emerged from your analysis of the data.

For each theme, start with general observations about what the data showed. You can mention:

• Recurring points of agreement or disagreement
• Patterns and trends
• Particularly significant snippets from individual responses

Next, clarify and support these points with direct quotations. Be sure to report any relevant demographic information about participants. Further information (such as full transcripts , if appropriate) can be included in an appendix .

When asked about video games as a form of art, the respondents tended to believe that video games themselves are not an art form, but agreed that creativity is involved in their production. The criteria used to identify artistic video games included design, story, music, and creative teams.One respondent (male, 24) noted a difference in creativity between popular video game genres:

“I think that in role-playing games, there’s more attention to character design, to world design, because the whole story is important and more attention is paid to certain game elements […] so that perhaps you do need bigger teams of creative experts than in an average shooter or something.”

Responses suggest that video game consumers consider some types of games to have more artistic potential than others.

Your results section should objectively report your findings, presenting only brief observations in relation to each question, hypothesis, or theme.

It should not  speculate about the meaning of the results or attempt to answer your main research question . Detailed interpretation of your results is more suitable for your discussion section , while synthesis of your results into an overall answer to your main research question is best left for your conclusion .

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

I have completed my data collection and analyzed the results.

I have included all results that are relevant to my research questions.

I have concisely and objectively reported each result, including relevant descriptive statistics and inferential statistics .

I have stated whether each hypothesis was supported or refuted.

I have used tables and figures to illustrate my results where appropriate.

All tables and figures are correctly labelled and referred to in the text.

There is no subjective interpretation or speculation on the meaning of the results.

You've finished writing up your results! Use the other checklists to further improve your thesis.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). How to Write a Results Section | Tips & Examples. Scribbr. Retrieved August 29, 2024, from https://www.scribbr.com/dissertation/results/

Is this article helpful?

Tegan George

Other students also liked, what is a research methodology | steps & tips, how to write a discussion section | tips & examples, how to write a thesis or dissertation conclusion, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

How To Write The Results/Findings Chapter

For qualitative studies (dissertations & theses).

By: Jenna Crossley (PhD). Expert Reviewed By: Dr. Eunice Rautenbach | August 2021

So, you’ve collected and analysed your qualitative data, and it’s time to write up your results chapter. But where do you start? In this post, we’ll guide you through the qualitative results chapter (also called the findings chapter), step by step. 

Overview: Qualitative Results Chapter

• What (exactly) the qualitative results chapter is
• What to include in your results chapter
• How to write up your results chapter
• A few tips and tricks to help you along the way
• Free results chapter template

What exactly is the results chapter?

The results chapter in a dissertation or thesis (or any formal academic research piece) is where you objectively and neutrally present the findings of your qualitative analysis (or analyses if you used multiple qualitative analysis methods ). This chapter can sometimes be combined with the discussion chapter (where you interpret the data and discuss its meaning), depending on your university’s preference.  We’ll treat the two chapters as separate, as that’s the most common approach.

In contrast to a quantitative results chapter that presents numbers and statistics, a qualitative results chapter presents data primarily in the form of words . But this doesn’t mean that a qualitative study can’t have quantitative elements – you could, for example, present the number of times a theme or topic pops up in your data, depending on the analysis method(s) you adopt.

Adding a quantitative element to your study can add some rigour, which strengthens your results by providing more evidence for your claims. This is particularly common when using qualitative content analysis. Keep in mind though that qualitative research aims to achieve depth, richness and identify nuances , so don’t get tunnel vision by focusing on the numbers. They’re just cream on top in a qualitative analysis.

So, to recap, the results chapter is where you objectively present the findings of your analysis, without interpreting them (you’ll save that for the discussion chapter). With that out the way, let’s take a look at what you should include in your results chapter.

What should you include in the results chapter?

As we’ve mentioned, your qualitative results chapter should purely present and describe your results , not interpret them in relation to the existing literature or your research questions . Any speculations or discussion about the implications of your findings should be reserved for your discussion chapter.

In your results chapter, you’ll want to talk about your analysis findings and whether or not they support your hypotheses (if you have any). Naturally, the exact contents of your results chapter will depend on which qualitative analysis method (or methods) you use. For example, if you were to use thematic analysis, you’d detail the themes identified in your analysis, using extracts from the transcripts or text to support your claims.

While you do need to present your analysis findings in some detail, you should avoid dumping large amounts of raw data in this chapter. Instead, focus on presenting the key findings and using a handful of select quotes or text extracts to support each finding . The reams of data and analysis can be relegated to your appendices.

While it’s tempting to include every last detail you found in your qualitative analysis, it is important to make sure that you report only that which is relevant to your research aims, objectives and research questions .  Always keep these three components, as well as your hypotheses (if you have any) front of mind when writing the chapter and use them as a filter to decide what’s relevant and what’s not.

Need a helping hand?

How do I write the results chapter?

Now that we’ve covered the basics, it’s time to look at how to structure your chapter. Broadly speaking, the results chapter needs to contain three core components – the introduction, the body and the concluding summary. Let’s take a look at each of these.

Section 1: Introduction

The first step is to craft a brief introduction to the chapter. This intro is vital as it provides some context for your findings. In your introduction, you should begin by reiterating your problem statement and research questions and highlight the purpose of your research . Make sure that you spell this out for the reader so that the rest of your chapter is well contextualised.

The next step is to briefly outline the structure of your results chapter. In other words, explain what’s included in the chapter and what the reader can expect. In the results chapter, you want to tell a story that is coherent, flows logically, and is easy to follow , so make sure that you plan your structure out well and convey that structure (at a high level), so that your reader is well oriented.

The introduction section shouldn’t be lengthy. Two or three short paragraphs should be more than adequate. It is merely an introduction and overview, not a summary of the chapter.

Pro Tip – To help you structure your chapter, it can be useful to set up an initial draft with (sub)section headings so that you’re able to easily (re)arrange parts of your chapter. This will also help your reader to follow your results and give your chapter some coherence.  Be sure to use level-based heading styles (e.g. Heading 1, 2, 3 styles) to help the reader differentiate between levels visually. You can find these options in Word (example below).

Section 2: Body

Before we get started on what to include in the body of your chapter, it’s vital to remember that a results section should be completely objective and descriptive, not interpretive . So, be careful not to use words such as, “suggests” or “implies”, as these usually accompany some form of interpretation – that’s reserved for your discussion chapter.

The structure of your body section is very important , so make sure that you plan it out well. When planning out your qualitative results chapter, create sections and subsections so that you can maintain the flow of the story you’re trying to tell. Be sure to systematically and consistently describe each portion of results. Try to adopt a standardised structure for each portion so that you achieve a high level of consistency throughout the chapter.

For qualitative studies, results chapters tend to be structured according to themes , which makes it easier for readers to follow. However, keep in mind that not all results chapters have to be structured in this manner. For example, if you’re conducting a longitudinal study, you may want to structure your chapter chronologically. Similarly, you might structure this chapter based on your theoretical framework . The exact structure of your chapter will depend on the nature of your study , especially your research questions.

As you work through the body of your chapter, make sure that you use quotes to substantiate every one of your claims . You can present these quotes in italics to differentiate them from your own words. A general rule of thumb is to use at least two pieces of evidence per claim, and these should be linked directly to your data. Also, remember that you need to include all relevant results , not just the ones that support your assumptions or initial leanings.

In addition to including quotes, you can also link your claims to the data by using appendices , which you should reference throughout your text. When you reference, make sure that you include both the name/number of the appendix , as well as the line(s) from which you drew your data.

As referencing styles can vary greatly, be sure to look up the appendix referencing conventions of your university’s prescribed style (e.g. APA , Harvard, etc) and keep this consistent throughout your chapter.

Section 3: Concluding summary

The concluding summary is very important because it summarises your key findings and lays the foundation for the discussion chapter . Keep in mind that some readers may skip directly to this section (from the introduction section), so make sure that it can be read and understood well in isolation.

In this section, you need to remind the reader of the key findings. That is, the results that directly relate to your research questions and that you will build upon in your discussion chapter. Remember, your reader has digested a lot of information in this chapter, so you need to use this section to remind them of the most important takeaways.

Importantly, the concluding summary should not present any new information and should only describe what you’ve already presented in your chapter. Keep it concise – you’re not summarising the whole chapter, just the essentials.

Tips for writing an A-grade results chapter

Now that you’ve got a clear picture of what the qualitative results chapter is all about, here are some quick tips and reminders to help you craft a high-quality chapter:

• Your results chapter should be written in the past tense . You’ve done the work already, so you want to tell the reader what you found , not what you are currently finding .
• Make sure that you review your work multiple times and check that every claim is adequately backed up by evidence . Aim for at least two examples per claim, and make use of an appendix to reference these.
• When writing up your results, make sure that you stick to only what is relevant . Don’t waste time on data that are not relevant to your research objectives and research questions.
• Use headings and subheadings to create an intuitive, easy to follow piece of writing. Make use of Microsoft Word’s “heading styles” and be sure to use them consistently.
• When referring to numerical data, tables and figures can provide a useful visual aid. When using these, make sure that they can be read and understood independent of your body text (i.e. that they can stand-alone). To this end, use clear, concise labels for each of your tables or figures and make use of colours to code indicate differences or hierarchy.
• Similarly, when you’re writing up your chapter, it can be useful to highlight topics and themes in different colours . This can help you to differentiate between your data if you get a bit overwhelmed and will also help you to ensure that your results flow logically and coherently.

If you have any questions, leave a comment below and we’ll do our best to help. If you’d like 1-on-1 help with your results chapter (or any chapter of your dissertation or thesis), check out our private dissertation coaching service here or book a free initial consultation to discuss how we can help you.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

22 Comments

This was extremely helpful. Thanks a lot guys

Hi, thanks for the great research support platform created by the gradcoach team!

I wanted to ask- While “suggests” or “implies” are interpretive terms, what terms could we use for the results chapter? Could you share some examples of descriptive terms?

I think that instead of saying, ‘The data suggested, or The data implied,’ you can say, ‘The Data showed or revealed, or illustrated or outlined’…If interview data, you may say Jane Doe illuminated or elaborated, or Jane Doe described… or Jane Doe expressed or stated.

I found this article very useful. Thank you very much for the outstanding work you are doing.

What if i have 3 different interviewees answering the same interview questions? Should i then present the results in form of the table with the division on the 3 perspectives or rather give a results in form of the text and highlight who said what?

I think this tabular representation of results is a great idea. I am doing it too along with the text. Thanks

That was helpful was struggling to separate the discussion from the findings

this was very useful, Thank you.

Very helpful, I am confident to write my results chapter now.

It is so helpful! It is a good job. Thank you very much!

Very useful, well explained. Many thanks.

Hello, I appreciate the way you provided a supportive comments about qualitative results presenting tips

I loved this! It explains everything needed, and it has helped me better organize my thoughts. What words should I not use while writing my results section, other than subjective ones.

Thanks a lot, it is really helpful

Thank you so much dear, i really appropriate your nice explanations about this.

Thank you so much for this! I was wondering if anyone could help with how to prproperly integrate quotations (Excerpts) from interviews in the finding chapter in a qualitative research. Please GradCoach, address this issue and provide examples.

what if I’m not doing any interviews myself and all the information is coming from case studies that have already done the research.

Very helpful thank you.

This was very helpful as I was wondering how to structure this part of my dissertation, to include the quotes… Thanks for this explanation

This is very helpful, thanks! I am required to write up my results chapters with the discussion in each of them – any tips and tricks for this strategy?

For qualitative studies, can the findings be structured according to the Research questions? Thank you.

Do I need to include literature/references in my findings chapter?

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• +44 (0) 207 391 9032

Recent Posts

• What Is an Internship? Everything You Should Know
• How Long Should a Thesis Statement Be?
• How to Write a Character Analysis Essay
• Best Colours for Your PowerPoint Presentation: How to Choose
• How to Write a Nursing Essay
• Top 5 Essential Skills You Should Build As An International Student
• How Professional Editing Services Can Take Your Writing to the Next Level
• How to Write an Effective Essay Outline
• How to Write a Law Essay: A Comprehensive Guide with Examples
• What Are the Limitations of ChatGPT?
• Academic News
• Custom Essays
• Dissertation Writing
• Essay Marking
• Essay Writing
• Essay Writing Companies
• Model Essays
• Model Exam Answers
• Oxbridge Essays Updates
• PhD Writing
• Significant Academics
• Student News
• Study Skills
• University Applications
• University Essays
• University Life
• Writing Tips

Dissertation findings and discussion sections

(Last updated: 2 March 2020)

Since 2006, Oxbridge Essays has been the UK’s leading paid essay-writing and dissertation service

We have helped 10,000s of undergraduate, Masters and PhD students to maximise their grades in essays, dissertations, model-exam answers, applications and other materials. If you would like a free chat about your project with one of our UK staff, then please just reach out on one of the methods below.

Granted that at some point in the discussion you are going to have to link back to this previous research. But you still have the opportunity to demonstrate how you have met that coveted gap in the research and generally made a useful contribution to knowledge.

There are many ways to write up both your findings and discussion. In shorter dissertations, it might make sense to have both of these comprise one section. In longer pieces of work, these chapters are usually separate.

Information contained in this section will highlight the finer details of writing up your findings and discussion sections. We will use the model of Description – Analysis – Synthesis , which are typically the three components readers expect to see in these two sections.

Preparing to write

We also assume that you have used some sort of software program to help you with the organisation of your findings. If you have not completed this process, you must do so before beginning to write. If not, your findings chapter may end up a confusing and unorganised mess of random information. If you need help in this area, make sure to seek it out before beginning to put your findings down on paper.

One of the main issues that students tend to encounter when writing up their findings is the amount of data to include. By the end of the research process, you've probably collected very large amounts of data . Not all of this can possibly appear in your dissertation without completely overwhelming the reader. As a result, you need to be able to make smart decisions about what to include and what to leave out.

One of the easiest ways to approach this task is to create an outline. In approaching the outline, it is in your best interest to focus on two key points. Firstly, you need to focus on answering your research questions. Secondly, you must include any particularly interesting findings that have cropped up as you completed your research.

An outline will give you the structure you need, and should make the whole process of presenting your findings easier. We realise that it is going to be a difficult process to pick and choose pieces of data to include. But you must be diligent in the work that you cut out. A findings chapter that is long and confusing is going to put the reader off reading the rest of your work.

Introducing your findings

It can be up to 40% of the total word count within your dissertation writing . This is a huge chunk of information, so it's essential that it is clearly organised and that the reader knows what is supposed to be happening. One of the ways you can achieve this is through a logical and organised introduction.

There are four main components that your introduction should include:

Reminding the reader of what you set out to do

A brief description of how you intend approaching the write up of the results

Placing the research in context

Letting the reader know where they can find the research instruments (i.e. the Appendix)

With a findings chapter, there should be no suspense for the reader. You need to tell them what they need to know right from the beginning. This way, they'll have a clear idea about what is still to come. A good introduction will start by telling the reader where you have come from in the research process and what the outcome was (in a couple of paragraphs or less).

You need to highlight the structure of the chapter (as you generally will do with all chapters) and where the reader might find any further information (e.g. in the appendices).

Organisation of data

This is really going to depend on the type of project you have created .

For example, if you have completed a qualitative research project, you might have identified some key themes within the software program you used to organise your data. In this case, highlighting these themes in your findings chapter may be the most appropriate way to proceed. Not only are you using information that you have already documented, you are telling a story in each of your sections (which can be useful in qualitative research).

But what if you undertook a more quantitative type study? You might be better off structuring your findings chapter in relation to your research questions or your hypotheses. This assumes, of course, that you have more than one research question or hypothesis. Otherwise you would end up just having one really long section.

This brings us to our next student mistake – trying to do too much within one section.

Subheadings are ultimately going to be your friend throughout your dissertation writing . Not only do they organise your information into logical pieces, they give the reader guidelines for where your research might be going. This is also a break for the reader. Looking at pages and pages of text without any breaks can be daunting and overwhelming for a reader. You don't want to overwhelm someone who is going to mark your work and who is responsible for your success (or failure).

When writing your introduction, be clear, organised and methodical. Tell the reader what they need to know and try to organise the information in a way that makes the most sense to you and your project. If in doubt, discuss this with your supervisor before you start writing.

Presentation of qualitative data

If you have conducted things like interviews or observations, you are likely to have transcripts that encompass pages and pages of work.

Putting this all together cohesively within one chapter can be particularly challenging. This is true for two reasons. First, it is always difficult to determine what you are going to cut and/or include. Secondly, unlike quantitative data, it can often be difficult to represent qualitative data through figures and tables, so condensing the information into a visual representation is simply not possible. As a writer, it is important to address both these challenges.

When considering how to present your qualitative data, it may be helpful to begin with the initial outline you have created (and the one described above). Within each of your subsections, you are going to have themes or headings that represent impactful talking points that you want to focus on.

Once you have these headings, it might be helpful to go back to your data and highlight specific lines that can/might be used as examples in your writing. If you have used multiple different instruments to collect data (e.g. interviews and observations), you are going to want to ensure that you are using both examples within each section (if possible). This is so that you can demonstrate to more well-rounded perspective of the points you are trying to make. Once you have identified some key examples for each section, you might still have to do some further cutting/editing.

Once you have your examples firmly selected for each subsection, you want to ensure that you are including enough information. This way, the reader will understand the context and circumstances around what you are trying to ‘prove’. You must set up the examples you have chosen in a clear and coherent way.

Students often make the mistake of including quotations without any other information. It is important that you embed your quotes/examples within your own thoughts. Usually this means writing about the example both before and after. So you might say something like, “One of the main topics that my participants highlighted was the need for more teachers in elementary schools. This was a focal point for 7 of my 12 participants, and examples of their responses included: [insert example] by participant 3 and [insert example] by participant 9. The reoccurring focus by participants on the need for more teachers demonstrates [insert critical thought here]. By embedding your examples in the context, you are essentially highlighting to the reader what you want them to remember.

Aside from determining what to include, the presentation of such data is also essential. Participants, when speaking in an interview might not do so in a linear way. Instead they might jump from one thought to another and might go off topic here and there.

It is your job to present the reader with information on your theme/heading without including all the extra information. So the quotes need to be paired down to incorporate enough information for the reader to be able to understand, while removing the excess.

Finding this balance can be challenging. You have likely worked with the data for a long time and so it might make sense to you. Try to see your writing through the eyes of someone else, which should help you write more clearly.

Presentation of quantitative data

Something to consider first with numeric data is that presentation style depends what department you are submitting to. In the hard sciences, there is likely an expectation of heavy numeric input and corresponding statistics to accompany the findings. In the arts and humanities, however, such a detailed analysis might not be as common. Therefore as you write out your quantitative findings, take your audience into consideration.

Just like with the qualitative data, you must ensure that your data is appropriately organised. Again, you've likely used a software program to run your statistical analysis, and you have an outline and subheadings where you can focus your findings. There are many software programs available and it is important that you have used one that is most relevant to your field of study.

For some, Microsoft Excel may be sufficient for basic analysis. Others may rely on SPSS, Stata, R, or any of the other programs available through your institution or online. Whatever program you have used, make sure that you document what you have done and the variables that have affected your analysis.

One common mistake found in student writing is the presentation of the statistical analysis. During your analysis of the data, you are likely to have run multiple different analyses from regressions to correlations. Often, we see students presenting multiple different statistical analyses without any real understanding of what the tests mean.

Presentation of quantitative data is more than just about numbers and tables. You must explain your findings and justify why you have run/presented the tests that you have. You could also explain how they relate to the research question. However, depending on how you have organised your work, this might end up in the discussion section.

Students who are not confident with statistical analysis often have a tendency to revert back to their secondary school mathematics skills. They commonly document the mean, median, and mode for all of their results. Now, these three outcomes can be important. But having a good understanding of why you are proceeding with this strategy of analysis is going to be essential in a primarily quantitative study.

That noted, there are different expectations for an undergraduate dissertation and a PhD thesis, so knowing what these expectations are can be really helpful before you begin.

Presentation of graphs, tables, and figures

The first is the use of colour and/or variables. Depending on the presentation of your dissertation, you may be required to print out a final copy for the marker(s). In many cases, this final copy must be printed in black and white. This means that any figures or graphs that you create must be readable in a black and white (or greyscale) format.

This can be challenging because there are only so many distinct shades of grey. In a pie chart, you might show one section as purple and the other as green. Yet when printed, both the purple and the green translate to approximately the same shade of grey, making your graph suddenly unreadable.

Another common error is overwhelming the reader with graphs and tables. Let's think about your outline and subheadings. If you're including a table under each subheadings, it needs to be relevant to the information that is being discussed in that chapter. There is no correct or incorrect number of graphs that should exist within the section, but you should use your judgement about what looks appropriate.

The final mistake we see is the duplication of writing (or absence of writing) when presenting a graph. Some students will present their findings in a graph or table and then write out this information again below the graph. This defeats the entire purpose of using the graph in the first place. So avoid this at all times.

Conversely, other students sometimes include a graph or figure but nothing else. Doing this denies the reader of context or purpose of said graph or figure. At some point, a balance needs to be struck where the reader has the information they require to really understand the point being made within the section.

Analysis and synthesis in a discussion

The purpose of a discussion chapter.

The structure of your discussion chapter is really going to depend on what you are trying to do and how you have structured your findings. If you chose to structure your findings by theme, it might make sense to continue this into the analysis chapter.

Other people might structure it according to the research questions. This clearly indicates to the reader how you have addressed your study. Marking a dissertation usually requires the marker to comment on the extent to which the research questions have been addressed. So by structuring a dissertation that lays out each research question for the marker, you are making their job easier. Needless to say, this a great thing.

Like any other chapter in your thesis, an introduction is an essential component of your discussion. By this point, the reader has gone through your findings and is now looking for your interpretation. Therefore, at the end of your discussion introduction you should highlight the content that each of the subsections will cover.

A conclusion to your discussion section (or a chapter summary) is also going to be beneficial. The length of the analysis chapter is usually quite long, so a wrap up of the key points at the end can help the reader digest your work. It can also help ensure that the reader actually understands the points you are trying to highlight within your project.

Critical thinking

Without any critical thinking, you are really doing yourself a disservice. It will affect the mark that you obtain on your overall dissertation. This is why the analysis chapter is usually weighted quite heavily on the marking rubric.

We tell students about critical thinking and the importance of it on a daily basis. And yet, there does seem to be a general confusion about what critical thinking entails, i.e. what constitutes critical thinking versus what is a simple description.

Critical thinking asks you to provide your own opinion on your topic, which can be daunting at first. For much of your academic career, you've likely been asked to use research to justify a position that has already been set. Unlike critical thinking, this requires you to use other people’s ideas. But even if you're new to it, try and get to grips with what critical thinking entails and use it in your work.

Creating sub-sections

Subheadings need to be informative but not too long. It is possible to layer your subheadings, so you might have a Chapter 2, a Section 2.1 and then a 2.1.1 and 2.2.2. Usually anything after 3 numerical points does not get a number and would not appear in your table of contents.

When creating titles for your subheadings, consider how they are going to look in the table of contents. They need to fit on one line, ideally, so putting your research question as the subheading might end up being too long. Conversely, one- or two-word subheadings usually doesn't give enough information about the purpose of the section.

Finding this balance is important. But remember you can always edit your subheadings retrospectively.

Linking to previous chapters

Ideally, you will be able to concisely and effectively link your research to what has been researched previously. But this can be a challenge. You don't want to repeat what has been said in your literature review or the findings . But you need to pull examples from both of these sections in order to make the points that you need to.

So, how do you tackle this?

One way is by referring the reader back to previous chapters, sections, or subsections. This process can generally be done at the end. You can put in a place holder until you know how your sections will be numbered. For example you might write: “In Section XYZ, the theme of … was discussed. Findings from this study indicate…. (see Section XYZ for details)”. While ‘XYZ’ is obviously not going to be the same section, by using the same abbreviation, you can then search ‘XYZ’ after you have completed writing and replace each term with the appropriate number. This also makes the proofreading process easier.

If you are submitting an electronic version of this document, you may also consider hyperlinks to take the reader to the different sections. But be aware that this can be considerably more work, so you should allow for this in your timescale if it's something you wish to implement.

Let's outline the main takeaway points:

It is essential that you keep in mind the ‘describe, analyse, synthesise’ model.

The findings chapter is essentially the describe part. You need to ensure that you have clearly identified data that relates to your research questions, hypotheses, or themes of your study.

For the ‘describe’ component, you are not looking to support your work with other research, but rather to present your contribution. It is also important to consider your data in the ‘describe’ section. If you have qualitative data, ensure that you have edited the quotes and examples to a reasonable length. Pick quotes that accurately represent your theme. Try not to focus solely on one or two participants (if possible). Ensure that you are demonstrating links between multiple instruments, if you used them.

If you are using quantitative data, be careful about how many statistical tests you run. Make sure you can justify why you chose one particular test over another. When presenting graphs, use a colour scheme that's appropriate for the reader when printing in black and white. Ensure that graphs and tables are appropriately explained, but that the information provided is not duplicated.

From the ‘describe’ element, you move into the 'analysis' and 'synthesis'. These parts usually appear in the discussion and ask you to employ your critical thinking skills to demonstrate how your research fits into the bigger picture. It is often the case that your analysis holds the most weight in the marking scheme. So you should spend considerable time ensuring this section is appropriate. It needs to demonstrate how you have attempted to answer your research questions.

Finally, create an outline before you begin. While this might seem tedious at first, filling in the sections with the appropriate information will mean that you are not writing things over and over again. It'll also make sure you do not go wildly off topic. It is always beneficial to have a second set of eyes assess your work for any errors or omissions. Many students choose to contact professional editors to help with this as they hold the relevant expertise to guide you on the correct path to creating a perfect discussion section that is ready for submission.

In terms of presentation, both the findings and discussion chapters will benefit from a clear and logical introduction and chapter summary. Remember that both of these chapters are meant to inform. You are leading the reader on a journey, so make sure they stay on the path and arrive at the final destination with you!

Writing your dissertation methodology

10 tips on writing a dissertation literature review, dissertation introduction, conclusion and abstract.

• dissertation chapters
• dissertation discussion
• dissertation findings
• dissertation help
• dissertation writing service
• study skills
• writing tips

Writing Services

• Essay Plans
• Critical Reviews
• Literature Reviews
• Presentations
• Dissertation Title Creation
• Dissertation Proposals
• Dissertation Chapters
• PhD Proposals
• Journal Publication
• CV Writing Service
• Business Proofreading Services

Editing Services

• Proofreading Service
• Editing Service
• Academic Editing Service
• Additional Services
• Marking Services
• Consultation Calls
• Personal Statements
• Tutoring Services

Our Company

• Frequently Asked Questions
• Become a Writer

Terms & Policies

• Fair Use Policy
• Policy for Students in England
• Privacy Policy
• Terms & Conditions
• How it works
• Frequently asked questions
• Essay Writing Services
• Dissertation writing services
• Dissertation chapter
• Primary research
• Law services
• PhD writing services
• Urgent Deadlines Service
• Referral Welcome
• Download PDF Example
• Welcome to Our Blog
• Become a writer
• Fair use policy
• Student Policy England
• Terms and conditions
• Promotion Terms and Conditions
• Privacy policy
• [email protected]
• Contact Form

Payment Methods

Cryptocurrency payments.